The helicopter always drifts to the left when I let off the d-pad. Can anyone confirm if this is a bug?
Atari 5200 - Choplifter Problem
-
Chris23235
- Top Contributor
- Posts: 867
- Joined: Sun May 24, 2020 8:45 pm
- Has thanked: 114 times
- Been thanked: 180 times
Re: Atari 5200 - Choplifter Problem
The 5200 had analog joysticks, I don't know how well implemented they are in the 5200 core but if you want to play with a d-pad I suggest switching to the Atari 8-Bit computer core and play Choplifter! on this platform as it had digital inputs on the computer.
-
Hackshed_Carl
- Posts: 115
- Joined: Mon May 25, 2020 3:22 pm
- Has thanked: 31 times
- Been thanked: 51 times
- Contact:
Re: Atari 5200 - Choplifter Problem
Also, there's no mention of the type of controller used.
It could be data from an analogue stick that's off
Re: Atari 5200 - Choplifter Problem
Hackshed_Carl wrote: ↑Mon Nov 13, 2023 3:48 pmAlso, there's no mention of the type of controller used.
It could be data from an analogue stick that's off
I was using an 8bitdo SN30 2.4G and an 8bitdo Ultimate C 2.4G controller, wired. Both did the same thing.
-
Flandango
- Core Developer
- Posts: 404
- Joined: Wed May 26, 2021 9:35 pm
- Has thanked: 43 times
- Been thanked: 343 times
Re: Atari 5200 - Choplifter Problem
A couple things to double check:
- While the DPAD may work in some 5200 games, it's actually meant to use an analogue stick, especially for choplifter.
- If you are using a controller with analogue sticks, make sure you have properly configured them with MiSTer's Main first (i.e. configure the Analogue stick(s) as the Left/Right Sticks.)
- Good idea to test the Analogue sticks in the InputTest Core in Advance mode and check to make sure ALX/ALY change values between -127 and 127.
- Configure the 5200 core to use the Analogue stick for direction (u/d/l/r).