MiSTer FPGA Forum

MexPower wrote: ↑Thu May 27, 2021 2:56 pm So my trusty PS1 died. Figured it'll still serve as a nice case for the MiSTer
I might have to spray paint it at some point

IMG_0368.jpg
IMG_0367.jpg

I like where this is going. Maybe a cleaner cut under the lid?
Might be able to use some of the parts from this kit to clean up the IO. https://www.youtube.com/watch?v=6eOFiuv2PGQ
https://www.thingiverse.com/thing:2012518

There was another version from a different maker which was legit. I'll share if i can find it.

EDIT: Found it: https://retro-emulation.com/raspberry-playstation.html

A few pictures here...

That little OLED is just the icing on the cake

Reg wrote: ↑Sat May 29, 2021 3:44 pm A few pictures here...

That is fantastic! I love the colors of the keyboard. Is that an Amiga 3000 style housing? Awesome that you have the MT32-pi and OLED TTY built in and the buttons with the colored LEDs look great as well.

LamerDeluxe wrote: ↑Sat May 29, 2021 6:38 pm

Reg wrote: ↑Sat May 29, 2021 3:44 pm A few pictures here...

That is fantastic! I love the colors of the keyboard. Is that an Amiga 3000 style housing? Awesome that you have the MT32-pi and OLED TTY built in and the buttons with the colored LEDs look great as well.

Yes the Checkmate 1500 cases are for Amiga, you can see more here https://www.checkmate1500plus.com/.

Reg wrote: ↑Sat May 29, 2021 3:44 pm A few pictures here...

Do you have a link to the USB cable you used on your MT32pi? What is that other cable connected on the top of it? Looks like it’s on the pi?

hyp36rmax wrote: ↑Sun May 30, 2021 3:59 am Do you have a link to the USB cable you used on your MT32pi? What is that other cable connected on the top of it? Looks like it’s on the pi?

Not by it at the moment, but that I believe is the cable for the TTGO T8 V1.7.1 that I attached for "cable management" !

I don't have a link for that cable I'm afraid, it was one that was kicking around that was a suitable length.

Made a couple of MiSTer builds with Arcade1Up cabinets I found on sale:
Biggest surprise was that the stock LCD is actually quite responsive (about 1/2 frame when compared to a PVM) so I went for a full mod with good quality parts (DeamonBites, Cherry switches, Sanwa sticks, etc). It's a great feeling to play on them! Now maybe one day I'll have room for an Astro City or an Egret...

Newsdee wrote: ↑Mon May 31, 2021 2:12 pm Now maybe one day I'll have room for an Astro City or an Egret...

You know what you really want is a dinoking!

My first attempt at a custom MiSTer case. I integrated the SNAC adapter with NES controller port since that is the only light gun I use and have nostalgia for. I had to do a lot of drilling of small holes and filing to get the ports right. It's not perfect, but not bad for my first attempt.

Here's my BOM. I already had the power switch, so that's not included...

Metal Project Box Case (Steel Top/Aluminum Bottom):
https://www.amazon.com/dp/B00B886K2U

Push Buttons (Red, Yellow, and Green 3-9V Momentary):
https://www.ebay.com/itm/124410133644

JST Connector (7-Pin):
https://www.ebay.com/itm/274604160112

JST Connector (5-Pin):
https://www.ebay.com/itm/264065731815

Dual USB 2.0 Panel Mount:
https://www.amazon.com/dp/B00ODXAOYM

Micro USB OTG Hub:
https://www.amazon.com/dp/B01JL837X8

Bliss Box NES Cable:
https://www.ebay.com/itm/264018287313

DC Power Jack (5.5x2.1MM 10A):
https://www.amazon.com/dp/B086G9V1WP

RCA Jacks (Red and White):
https://www.amazon.com/dp/B008I1Q84A

VGA Extension Cable:
https://www.amazon.com/dp/B072KN982G

HDMI Panel Mount Cable:
https://www.amazon.com/dp/B08CRJP88B

Cat 6 Ethernet Panel Mount Cable:
https://www.amazon.com/dp/B07VBJ2HRC

EDIT: Added Visio file for ports layout

very simple !!!

thanks for links

fenderc01 wrote: ↑Thu Jun 17, 2021 12:37 pm ...I had to do a lot of drilling of small holes and filing to get the ports right.

I remember...

Hello,

how did you drilling of small holes and filing to get the ports

what kind of tools do you use to make precise drilling

sorry for my bad english

teddy1983 wrote: ↑Fri Jun 18, 2021 10:18 am how did you drilling of small holes and filing to get the ports

what kind of tools do you use to make precise drilling

It helps to have a hole punch or awl to mark the center of your holes, a drill press and a clamp to keep things steady, and some small metal files to get the openings precise. Also, it really helped having an aluminum case that was easy to file.

Fenderc01 Thank you very much

teddy1983 wrote: ↑Fri Jun 18, 2021 10:18 am what kind of tools do you use to make precise drilling

If you have an sensitive surface use painter tape to keep it safe.
Make sure your drillers are not broken and sharp.
Drill small (not too small) and file it bigger.
And measure, measure, measure

fenderc01 wrote: ↑Thu Jun 17, 2021 12:37 pm My first attempt at a custom MiSTer case. I integrated the SNAC adapter with NES controller port since that is the only light gun I use and have nostalgia for. I had to do a lot of drilling of small holes and filing to get the ports right. It's not perfect, but not bad for my first attempt.

Do you think you're getting proper airflow without any vents on the top portion of the case?

kfreiberg wrote: ↑Fri Jun 18, 2021 5:23 pm Do you think you're getting proper airflow without any vents on the top portion of the case?

There are vents on both sides that seem to allow good airflow. It's been working well so far.

A friend of mine saw my little PC-Engine themed MiSTer, and mentioned how he used to love Genesis games. I decided to build him one with a Genesis theme.

These are my current work in progress MiSTer “cases”.


Still have to finish the layout of the Ms. Pac-Man control panel and make the light up marquees. All controls have been updated with proper Sanwa/Happ parts. iPac 2 and Spinner are from Ultimarc. A proper 4 way joystick for Ms. Pac-Man and Donkey Kong makes a world of difference. The led buttons are set up to be lit at all times rather than to show disk access. They are used for OSD and soft reset/bypass buttons in control setup.

I call her Naomi

More of these need to be available to buy! Some amazing designs.

The RSK202-series is available to buy to anyone that wants one...

MrKai wrote: ↑Sun Jun 27, 2021 8:51 pm The RSK202-series is available to buy to anyone that wants one...

Looks a fair price too!

BlackSpy wrote: ↑Mon Jun 28, 2021 10:45 am

MrKai wrote: ↑Sun Jun 27, 2021 8:51 pm The RSK202-series is available to buy to anyone that wants one...

Looks a fair price too!

A lot of time and effort went into trying to get it and keep it there...it was really important. Thank you, that...thank you

MrKai wrote: ↑Sun Jun 27, 2021 8:51 pm The RSK202-series is available to buy to anyone that wants one...

Well done!

After having just the DE10/HDMI setup for about a year, I took the plunge & got the full setup.

I really wanted that 90's look so the acid green acrylic case from misterfpga.co.uk did the trick for me!

I love that 90's glow in the dark wallpaper mouse pad you have there.

Here’s the SNES model. Now my brother wants a Marty theme for his.