MiSTer FPGA Forum

dennis808 wrote: ↑Mon Nov 01, 2021 8:39 pm so I printed this case: https://www.thingiverse.com/thing:2503438

Your slim Mister case looks great.

thank you for this link i will be printing a slim case just like this one.

@annette
Thanks
Be aware though that the opening for the 32MB SDRAM didn't line up; I had to file away about a centimeter to make it fit. Easily done because the PLA isn't that tough. There is a thread mentioned on the Thingiverse page that has different versions of this case posted. I liked this one the best because is was the smallest, but not without it's problems. Also make sure you have some small self-tapping screws to close the case with. I got my screws from a broken keyboard that I dismantled. Good luck!

Did this very early lockdown

Looks very nice

Jellybelly wrote: ↑Wed Aug 18, 2021 3:55 pm 3D Printed case, Not the final colour, and a few more tweeks to add (internal sata bay for HDD, vga and audio out), but works for me nicely at the moment, can post OpenSCAD files if anyone wants them and try to remember the BOM.... )

Hey,

Love this case

Don’t suppose you have the BOM for the parts you used to put it all together please??

Many thanks

The Mister Series X.

Made with wood.
A bit rough around the edges
And very simple design,with the bare minimum.

Love that Xbox style case, even if you do think it's a bit round around the edges. It's still better than my woodworking skills would be

I really should do something with mine rather than the simple top and bottom panels that I have. Ideal would be a tiny Mini ITX box but whether they're worth the price or not, it's not worth (for me) spending that kind of money on one of these ITX boards that are starting to come out.

ChloeIsFab wrote: ↑Wed Nov 03, 2021 9:55 pm Did this very early lockdown

Love that case, what case is that?

My Mister inside a C64 Maxi (TheC64) case.

Hi there! i update my MiSTer enclosure with some details

guddler wrote: ↑Sun Nov 07, 2021 12:47 pm I really should do something with mine rather than the simple top and bottom panels that I have. Ideal would be a tiny Mini ITX box but whether they're worth the price or not, it's not worth (for me) spending that kind of money on one of these ITX boards that are starting to come out.

I recommend you check this MiSTer Mini ITX Adaptor, I'm thinking whether to use it myself:
https://www.thingiverse.com/thing:4738986
It even includes the IO shield, and the creator [Wickedsun] lists all the extension cables they used. Wickedsun, if you read this, thank you for this amazing creation.

Pic inside the mini-ITX case. Close the case and it will look nice and tidy.


Edited: I see poster Monoksidec already showed his setup, where he makes good use of the adapter.
viewtopic.php?p=29962#p29962

grhmhome wrote: ↑Sun Nov 07, 2021 5:36 pm My Mister inside a C64 Maxi (TheC64) case.

Can you post an inside snap? Just wondering how you set it up

Updated mt32 design with larger screen from ken at legacy pixels

MostroW wrote: ↑Sun Nov 07, 2021 1:45 pm

ChloeIsFab wrote: ↑Wed Nov 03, 2021 9:55 pm Did this very early lockdown

Love that case, what case is that?

Thank you, was just a generic itx case from either ali express or amazon (think it was available on both). Not sure if I am allowed to link stuff but can be easily found with the keywords "itx case aluminium". I drilled out the single power switch plus a few more for the input buttons, and added the led switches. I added in a 3d printed mb tray to hold my mister stack and used breakout cables to two usb sockets built in to the side and to a 3d printed IO shield on the back for more usb, hdmi, power and network. It is just tall enough to fit the usb board/de10nano/mister io board without needing to split them. I wanted a minimal clean design and i think it worked very well. I think a bit of my inspiration was HAL9000 hehe

Here's my setup. It has everything I need. 8BitDo M30, N30 and SN30 2.4GHZ controllers on the controller roller I designed. Not pictured is the 8bitdo arcade stick. All of the receivers are built into the case.

I love the iPad screen.

Such a nice compact design with a power button and Sega Saturn Analog video output!!

BlockABoots wrote: ↑Fri Nov 12, 2021 1:21 pm Such a nice compact design with a power button and Sega Saturn Analog video output!!

What board is that?!

This is my setup:

> Ultimate MiSTer PRO.
> Dell UltraSharp 1708FP.
> Custom Fighstick w/spinner Made in Argentina!

Sanwa joystick + American type buttons.

jawler wrote: ↑Thu Oct 28, 2021 4:01 pm

lomdar67 wrote: ↑Thu Oct 28, 2021 2:28 pm

Sartis wrote: ↑Sun Oct 17, 2021 4:00 am

Can you provide us the link to the case and the parts used for your build? That case is AWESOME!!

Yes please provides us with a link. I couldn't find it on Aliexpress. It's almost perfect, I just would want to include the MT32pi

Hello!!! you can buy it here https://www.aliexpress.com/store/911238071
I thought about including the mt32-pi inside the box but I discarded it because of what it occupied and because of the ease of changing the system in the future.
Cheers!

Anyone fancy a UK group order?

Not the smallest case

Looks nice and has enough space for more internal hardware (hdd/joystick adpter).
The connector box looks great.

emmadness wrote: ↑Fri Nov 12, 2021 4:54 pm This is my setup:

> Ultimate MiSTer PRO.
> Dell UltraSharp 1708FP.
> Custom Fighstick w/spinner Made in Argentina!

Sanwa joystick + American type buttons.

Sick. Do you have a link for the stick?

Murderface1982 wrote: ↑Mon Nov 15, 2021 8:47 am Sick. Do you have a link for the stick?

Japan Sanwa Joystick Red JLF-TP-8YT-SK & GT-Y & Harness Video Arcade Parts
Same seller, bought in 2019. You can ask for different profiles of restrictors; I use the octagonal and it works great for practically any game.

I have released MiSTer PLUS model. Thanks to Lu's Retro for the review.

https://www.youtube.com/watch?v=8NzVBdlwbgg

I've added an RGB fan to my MiSTer. It works really well in combination with the existing LEDs. It changes colors smoothly with some nice looking color gradients. I shortened the lead and added a new connector to it. More info in the description.

New version of case with 2.5" removable enclosure upgrade.

Sorgelig wrote: ↑Tue Nov 30, 2021 12:04 pm New version of case with 2.5" removable enclosure upgrade.

Looking excellent, that is an impressive large volume print for a resin printer!

I also love the NES cart slot.

Here is my TheVic20 implementation. The specs:

Terasic DE10 Nano - IO Board - 128 MB SDRAM - I2S mod - 500GB SDD - MT32Pi OLED - 10 USB