Recommend Displays and Their Supported Resolutions

[Karmeck]

It's hard out there so why not crate a list.

I have a Samsung G5 32 inch
1920x1440 works
Sync 0 (tested 2 but had issues with gameboy, but after learning gameboy is not the best for testing this, I have to re-test)

Looking for a new, non curved screen, I had a hard time finding recommendations. Yes, I've seen the proart thread, plan on adding that monitor here.

I'm looking for a 32 inch monitor, but I don't think a thread for only 32 inch monitors is the best move.

So let's make a list.

You post:
monitor name and model number
If it suports 1920x1440
And what sync mode works.
Special timings (if needed)

And I update this first post with every added monitor.

RevolvingDork:
ProArt PA248QV
1920x1200
vsync_adjust=2
video_mode=1920,48,32,80,1200,3,6,26,154128

[AmanoJacu]

As I said in this thread:

viewtopic.php?t=4558

32GK850G 1920x1440 doesn't work

32GK850F 1920x1440 does work

In both of them vsync_adjust=2 works in all cores I tried, mostly arcade ones.

[Phaedrus]

LG 27GL850 1440p 144hz gsync https://www.rtings.com/monitor/reviews/lg/27gl850-b

1440p and Vsync adjust 2 works. I did have to use the Atrac17 6x modelines though. It also rotates 90 degrees for tate mode.

Just need to turn off the VRR feature to enable the Just Scan 1:1 aspect ratio

EDIT: I've now tested it with the higher ipad res and vscale_mode=4 and it actually works fine when the monitor is set to just scan since the actual display resolution usually ends up being close to or below 1440p anyway.

[GeoNeo]

Dell 27 inch S2721DS (1440p 75Hz) monitor works with 1920x1440p on the Mister in low input lag mode. In monitor options you enable 4:3 aspect ratio and everything looks amazing.

The AOC AG271QG 1440p 165HZ GSYNC Monitor does not work in 1920x1440p.

[FoxbatStargazer]

The AOC AG271QG 1440p 165HZ GSYNC Monitor does not work in 1920x1440p.

Gsync modules on 1440p monitors in general seems to be bad news for 1920x1440. Seen a lot of complaints here to that effect.

[jd213]

Haven't done much testing but I've been pretty satisfied with this relatively cheap 27" 4K Samsung monitor : amazon.com/dp/B09FRCXSJK
Don't think it has noticable lag, it does tate (clockwise only), and looks pretty good overall, except for black screens which look pretty grey since it's edge-lit
Have only been using with 1080p output but all arcade games I threw at it worked fine with vsync_adjust=2 including 55hz/57hz stuff. It also accepts 70hz/75hz ranges for cores like DOS and Wonderswan. PAL Megadrive didn't work correctly (flickering) so might not be a good choice for PAL stuff.

[charmless]

I have the Asus ProArt PA278QV and it works with vsync_adjust 2 for every core I've ever tried. Rotates both ways. I'm really happy with it!

Fixed post according to OP.

ASUS PorArt PA278QV
Supports 1920x1440
V_Sync 2
VRR Min 48 VRR Max 75